Inkplate 10
Inkplate 10 is a 9.7-inch grayscale e-paper display board with an ESP32 on it, so you can show dashboards, photos or weather data and run for months on a battery. E-paper keeps its image without power, and the board draws 22 µA in deep sleep. You program it from Arduino IDE, with MicroPython as the second environment listed for the board.
Gallery
This documentation is for
ProductInkplate 109.7-inch grayscale e-paper display board with an ESP32, microSD slot, RTC and a Li-ion charger.StoreBuy it on soldered.comPrice, stock and every variant of this product in the Soldered webshop.Open the product pageThis documentation also covers Inkplate 10 with enclosure and battery (SKU 333247) and the separately sold Additional Enclosure for Inkplate 10 (SKU 333344).
At a glance
Display9.7-inch e-paper, 1200 × 825 pixels, grayscale, no frontlight, no touch
Modes1-bit (black and white) and 3-bit (grayscale) in the Arduino library
Refresh1.61 s full refresh, partial updates supported
MCUESP32-WROVER, 240 MHz
PowerUSB-C, or a Li-ion battery through the 2-pin JST connector with an onboard charger
Deep sleep22 µA
On boardmicroSD slot, RTC with a CR2032 backup battery holder, Qwiic connector
EnvironmentsArduino IDE, MicroPython
What's in the box
Inkplate 10 (main product)SKU 333241
USB-C cableSKU not listed


