Zum Hauptinhalt springen

e-Paper model

Inkplate 10 uses a 9.7-inch grayscale e-paper panel. The label on the panel flex cable reads ED097OC4(LF), which you can read on the underside photo.

PanelED097OC4(LF), as printed on the flex cable label
Size9.7 inches
Resolution1200 × 825 pixels
Display modes1-bit (black and white) and 3-bit (grayscale) in the Arduino library
Interface8-bit parallel data bus (EPD_D0 to EPD_D7) plus control lines, through an FFC connector (SFV33R-1STBE1HLF)
FrontlightNone
TouchNone

The schematic (board version 1.3.1) wires the panel connector to the ESP32 with eight data lines, EPD_D0 to EPD_D7, and the control lines CL, CKV, SPH, LE, OE, GMODE and SPV.

The pinned Arduino library driver describes the panel as 9.7 inches, 1200 × 825, driven through GPIO expanders, with a TPS65186 chip generating the panel supply rails.

Underside of Inkplate 10 with the panel orange flex cable running along the top edge
The panel flex cable runs along the top edge of the underside