Zum Hauptinhalt springen

Soldered Pressure & Temperature Sensor BMP585 breakout

A 22 x 22 mm breakout for Bosch Sensortec's BMP585, an absolute barometric pressure sensor that also measures temperature. Its typical ±6 Pa relative accuracy is fine enough to tell which floor of a building you are on. Connect it over I2C through either of its two Qwiic connectors or the 2.54 mm headers.

Purple Soldered Pressure & Temperature Sensor BMP585 breakout at an angle, with a white Qwiic connector on two edges, the BMP585 in the middle and pin labels along two 4-pin header rows
Isometry
The breakout seen from above: GND, 3V3, SDA and SCL pins along the top edge, GND, ADDR, INT and CSB along the bottom edge, a Qwiic connector on the left and right, and solder jumpers JP3, JP1 and JP2 near the bottom corners
Top down
Underside of the breakout, printed with the product name, I2C ADDR 0x47 and solde.red/333189
Bottom up

This documentation is for​

Purple Soldered Pressure & Temperature Sensor BMP585 breakout at an angle, with two white Qwiic connectorsProductSoldered Pressure & Temperature Sensor BMP585 breakoutBMP585 barometric pressure and temperature sensor breakout with two Qwiic connectors.SKU 333189

At a glance​

InterfaceI2C, address 0x47 (default) or 0x46
Main ICBosch Sensortec BMP585
Pressure30 to 125 kPa, ±6 Pa typical relative accuracy
Temperature-40 to 85 °C
Voltage1.71 to 3.6 V on 3V3, 3.3 V logic only
Current1.3 µA typical at 1 Hz with lowest-power oversampling, 0.55 µA typical in deep standby (both at 25 °C)
Connectors2x Qwiic, 2x 4-pin 2.54 mm header
Dimensions22 x 22 mm, 2x 3.2 mm mounting holes
EnvironmentsArduino, MicroPython

What's in the box​

QtyItemNotes
1Soldered Pressure & Temperature Sensor BMP585 breakout (main product)SKU 333189
1Header pins (unsoldered)Header pins included for all breadboard-compatible pins