Environmental Sensor BME280 Breakout
This breakout measures temperature, relative humidity and barometric pressure with a Bosch BME280, and the library can turn the pressure reading into an estimate of altitude. It talks over I2C (a two-wire bus for talking to chips) at the fixed address 0x76, works with 3.3 V and 5 V controllers, and carries two Qwiic connectors so you can wire it up without soldering.
This documentation is for
ProductEnvironmental Sensor BME280 BreakoutA small I2C breakout that measures temperature, relative humidity and pressure, with two Qwiic connectors and a four-pin header.ShopBuy it on our shopPrice, stock and every variant of this product in the Soldered shop.Open the shop pageAt a glance
InterfaceI2C, fixed address 0x76
Main ICBME280 (Bosch)
MeasuresTemperature, relative humidity, pressure
Ranges-40 to 80 °C, 0 to 100 % RH, 30 to 110 kPa
Voltage3.3 V to 5 V supply, 3.3 V or 5 V logic
Current1 mA while measuring, under 5 µA idle
Connectors2x Qwiic plus a four-pin header
Dimensions22 x 38 mm (v1.2.0)
EnvironmentsArduino, MicroPython
What's in the box
| Qty | Item | Notes |
|---|---|---|
| 1 | Environmental Sensor BME280 Breakout (main product) | SKU 333036 |
| 1 | Header pins (unsoldered) | Header pins included for all breadboard-compatible pins |


