Skip to main content

Logic Level Converter I2C TXS0104 Breakout

A four-channel logic level converter built on the TXS0104, so a 5 V device and a 3.3 V device can share an I2C bus or digital signals safely.

Connect a 3.3 V sensor straight to a 5 V microcontroller and the higher voltage can damage the sensor. This board sits between the two and translates the logic levels, so each device sees signals at its own voltage. It is made for I2C, and the TXS0104 keeps up with high bus speeds.

The left side is the low-voltage side: power it through VCCL and wire your lower-voltage device to A1 to A4. The right side is the high-voltage side, with VCCH and B1 to B4. Four channels cover an I2C bus (SDA and SCL) with two to spare for other digital signals. The OE pin can switch all outputs off, and the board leaves them on by default.

This documentation is for​

At a glance​

InterfaceI2C, digital GPIO
Main ICTXS0104
Channels4 (A1 to A4 paired with B1 to B4)
Output enableOE pin, enabled by default
VoltageVCCL 1.65 V to 3.6 V, VCCH 2.3 V to 5 V
ConnectorsTwo 6-pin 2.54 mm headers and a single OE pin
Dimensions22 × 22 mm, two 3.2 mm mounting holes

What's in the box​

QtyItemNotes
1Logic Level Converter I2C TXS0104 Breakout (main product)333016
1Header pins (unsoldered)Header pins included for all breadboard-compatible pins