Skip to main content

Arduino Library

The Electrochemical Gas Sensor Soldered library (#include "Electrochemical-Gas-Sensor-SOLDERED.h") reads this board and the other boards of the family. It has a preset for each supported cell; use SENSOR_SO2 for this board.

The library picks how to talk to the board from the address passed to the constructor: 0x30 to 0x37, the ADDRESS switch range, talks to the board's on-board microcontroller, and any other value talks to an ADS1115 directly. Each page below shows one of the library's examples as it stands in the library. Most of them use another cell's preset, and each page says where to put SENSOR_SO2 for SO2 values.

Not installed yet? Follow Quick Start before using the functionality pages.

Functionality​

Each page starts with one verified library example and explains every function the example uses to get that result.