MicroPython Library
The Soldered ElectrochemicalGasSensor MicroPython Library reads this board and the other boards of the family. Its ElectrochemicalGasSensor module has a preset for each supported cell; use SENSOR_SO2 for this board.
The module picks how to talk to the board from the address passed as adc_addr: 0x30 to 0x37, the ADDRESS switch range, selects its bridge mode, which talks to the board's on-board microcontroller, and any other value selects its direct mode, which talks to an ADS1115 at that address on your I2C bus.
On this board, the LMP91000 and the ADS1115 sit on the on-board microcontroller's own I2C bus (bus 2), not on the Qwiic connectors. The Qwiic connectors carry bus 1, where the board answers at the address its ADDRESS switch sets, 0x30 as shipped. See Hardware Details.
Each page below shows one of the library's examples as it stands in the library. Most of them use another cell's preset, and each page says where to put SENSOR_SO2 for SO2 values.
Not installed yet? Follow Quick Start before using the functionality pages.
Functionality
Each page starts with one verified module example and explains every function the example uses to get that result.