Soldered ADS-B 1090MHz Receiver ESP32-S3
Track aircraft around you with this ESP32-S3 development board and its onboard 1090 MHz ADS-B receiver.
These pages cover reading the receiver over its UART with the Soldered Arduino and MicroPython libraries. The ESP32-S3 has Wi-Fi, but neither library sends the data over Wi-Fi. Soldered also has an ESP-IDF component for this board; these pages do not cover it and have no ESP-IDF guide.
This board is still in development and is not released yet.
Gallery
This documentation is for
At a glance
MCUESP32-S3-WROOM-1-N8R8, dual-core Xtensa LX7 up to 240 MHz
WirelessWi-Fi 802.11 b/g/n (2.4 GHz), Bluetooth LE 5
Memory512 KB SRAM, 8 MB flash, 8 MB PSRAM
Power5 V from USB-C or the VCC header pin, through an onboard TPS7A2633 regulator (3.3 V, 500 mA)
Receiver currentThe TT-SC1 receiver draws 70 mA typical at 3.3 V
ConnectorsUSB-C, IPEX antenna connector, 2x Qwiic (I2C), two 12-pin headers
Dimensions38 x 54 mm
EnvironmentsArduino IDE, MicroPython and ESP-IDF; these pages cover the Soldered receiver libraries for Arduino IDE and MicroPython
What's in the box
Soldered ADS-B 1090MHz Receiver ESP32-S3 (main product)SKU 333388
Header pins (unsoldered)Header pins, not soldered to the board.
USB-C cable
FXUB1900 ADS-B Antenna

