Soldered CP2102 USB to UART Breakout
A USB-C to UART adapter built around the CP2102N. It gives you a COM port on your computer, 3.3 V logic, a switch that sets the VCC pin to 5 V or 3.3 V, and an FTDI-compatible header.
This documentation is for
ProductSoldered CP2102 USB to UART BreakoutUART is the two-wire serial link (TX and RX) most boards use to take new code and print messages. This breakout turns it into a COM port on your computer.StoreBuy it on solde.redPrice, stock and every variant of this product on the Soldered store.Open the product page
At a glance
InterfaceUART over USB
Main ICCP2102N-A02 (Silicon Labs)
Baud rateUp to 3 Mbaud
VCC output5 V or 3.3 V, set with a slide switch
Voltage5 V from USB-C, 3.3 V logic on TX and RX
Current500 mA fuse on the USB 5 V line
ConnectorsUSB-C, 6-pin FTDI header, 6-pin and 8-pin side headers (2.54 mm)
Dimensions38 × 22 mm
What's in the box
| Qty | Item | Notes |
|---|---|---|
| 1 | Soldered CP2102 USB to UART Breakout (main product) | SKU 333393 |
| 1 | Header pins (unsoldered) | Header pins included for all breadboard-compatible pins |