Soldered Electrochemical CO Gas Sensor Breakout (Qwiic)
This board measures carbon monoxide (CO) from 0 to 1000 ppm with an SGX-4CO electrochemical cell. An LMP91000 analog front end biases the cell and turns its current into a voltage, a 16-bit ADS1115 converts it, and an ATtiny404 talks to both chips for you, so your microcontroller sees a single I2C device at its default address, 0x30.
This documentation is for
ProductSoldered Electrochemical CO Gas Sensor Breakout (Qwiic)CO sensor board with an SGX-4CO cell, 0 to 1000 ppm, read over Qwiic.ShopBuy it on our shopPrice, stock and every variant of this product in the Soldered shop.Open the shop pageAt a glance
InterfaceI2C over Qwiic or header, address 0x30 (0x30 to 0x37 by switch)
Main ICTexas Instruments LMP91000 analog front end
Gas cellSGX-4CO electrochemical, carbon monoxide
Range0 to 1000 ppm CO, response (T90) under 30 s
Voltage3.3 V only, no regulator
Connectors2x Qwiic, 2.54 mm headers
Dimensions38 x 38 mm
Environments-30 to 50 °C, 15 to 90% RH (non-condensing)
What's in the box
| Qty | Item | Notes |
|---|---|---|
| 1 | Soldered Electrochemical CO Gas Sensor Breakout (Qwiic) (main product) | SKU 333328 |
| 1 | Header pins | Unsoldered |

