Soldered Electrochemical Gas Sensor Breakout (Qwiic)
An analog front end for SGX-4 series electrochemical gas cells. The LMP91000 biases the cell and turns its current into a voltage, a 16-bit ADS1115 converts that voltage, and an ATtiny404 talks to both chips for you, so your microcontroller sees a single I2C device. The libraries carry presets for CO, NO2, SO2, O3, NO, H2S, NH3 and Cl2 cells.
This documentation is for
ProductSoldered Electrochemical Gas Sensor Breakout (Qwiic)Analog front end for SGX-4 electrochemical gas cells. It biases the cell, reads it with a 16-bit ADC and reports over Qwiic.ShopBuy it on our shopPrice, stock and every variant of this product in the Soldered shop.Open the shop pageAt a glance
InterfaceI2C (Qwiic), address 0x30, 0x30 to 0x37 by switch
Main ICTexas Instruments LMP91000 analog front end
ADCTexas Instruments ADS1115, 16-bit, 4 inputs
Gas cellSGX-4 series, 3-electrode
Voltage3.3 V only, no regulator
Connectors2x Qwiic, 2.54 mm headers
Dimensions38 x 38 mm, 4x 3.2 mm mounting holes
EnvironmentsArduino, MicroPython
Up to eight boards share one I2C bus, each on its own address. The ADS1115's
other three inputs, AIN1 to AIN3, are on the header for your own analog
signals.
What's in the box
| Qty | Item | Notes |
|---|---|---|
| 1 | Soldered Electrochemical Gas Sensor Breakout (Qwiic) (main product) | SKU 333417 |
| 1 | Header pins | Unsoldered |

