Soldered Electrochemical O2 Gas Sensor Breakout (Qwiic)
This board measures oxygen (O2) with an SGX-4OX-ROHS electrochemical cell, from 0 to 25 % vol. An LMP91000 analog front end biases the cell and turns its current into a voltage, a 16-bit ADS1115 ADC converts that voltage, and an ATtiny404 talks to both chips for you, so your microcontroller sees a single I2C device at 0x30. Plug it in with a Qwiic cable and read it from Arduino or MicroPython.
This documentation is for
ProductSoldered Electrochemical O2 Gas Sensor Breakout (Qwiic)Oxygen sensor board with an SGX-4OX-ROHS electrochemical cell for 0 to 25 % vol, read by an LMP91000 and a 16-bit ADC over Qwiic.ShopBuy it on our shopPrice, stock and every variant of this product in the Soldered shop.Open the shop pageAt a glance
InterfaceI2C over Qwiic or the 2.54 mm header, address 0x30 (0x30 to 0x37 by switch)
Main ICTexas Instruments LMP91000 analog front end, ADS1115 16-bit ADC, ATtiny404 bridge
Gas cellSGX-4OX-ROHS electrochemical oxygen cell
Range0 to 25 % vol O2, T90 under 10 s
Voltage3.3 V only, no regulator
Connectors2x Qwiic, 2.54 mm headers
Dimensions38 x 38 mm
EnvironmentsArduino, MicroPython
What's in the box
| Qty | Item | Notes |
|---|---|---|
| 1 | Soldered Electrochemical O2 Gas Sensor Breakout (Qwiic) (main product) | SKU 333394 |
| 1 | Header pins | Unsoldered header pins |

