Skip to main content

Soldered Electrochemical SO2 Gas Sensor Breakout (Qwiic)

This board measures sulphur dioxide (SO2) from 0 to 20 ppm with an SGX-4SO2 electrochemical cell. An LMP91000 analog front end biases the cell and turns its current into a voltage, a 16-bit ADS1115 ADC converts that voltage, and an ATtiny404 talks to both chips for you, so your microcontroller sees a single I2C device on Qwiic.

This documentation is for​

At a glance​

InterfaceI2C over Qwiic, address 0x30 (0x30 to 0x37 by switch)
Main ICTI LMP91000 analog front end, TI ADS1115 16-bit ADC
Gas and rangeSulphur dioxide (SO2), 0 to 20 ppm
Resolution0.1 ppm (typical, electronics dependent)
Voltage3.3 V only, no regulator
Connectors2x Qwiic, 2.54 mm headers
Dimensions38 x 38 mm
Environments-30 to 50 °C, 15 to 90% RH

What's in the box​

QtyItemNotes
1Soldered Electrochemical SO2 Gas Sensor Breakout (Qwiic) (main product)SKU 333325
1Header pins (unsoldered)For the 2.54 mm headers