Soldered NULA Node RP2040
NULA Node RP2040 is a development board with the radio built right in. It pairs Raspberry Pi's dual-core Cortex-M0+ RP2040 (a microcontroller, MCU) running at 133 MHz with the Raspberry Pi Radio Module 2, so you get WiFi 4 and Bluetooth 5.2 without adding a second board.
Gallery
This documentation is for
ProductSoldered NULA Node RP2040An RP2040 development board with WiFi 4 and Bluetooth 5.2 built in. The header pins come in the box, unsoldered.
VariantSoldered NULA Node RP2040 (male headers)The same board with both 15-pin male headers already soldered on.ShopBuy it on our shopThe Soldered NULA Node RP2040 listing in the Soldered shop.Open the shop pageAt a glance
MCUDual-core Arm Cortex-M0+ RP2040 at 133 MHz
WirelessWiFi 4 (802.11 b/g/n, 2.4 GHz) and Bluetooth 5.2 (Classic and Low Energy), via the Raspberry Pi Radio Module 2
Memory264 KB SRAM, 16 MB flash
PowerUSB-C, or a 3.7 V Li-Ion battery on the 2-pin JST connector with onboard charging
ConnectorsUSB-C, Qwiic (I2C), 2-pin JST battery, 3-pin SWD debug header, 24 GPIO across two headers
Dimensions26 x 65 mm, header rows 0.9 in apart
EnvironmentsArduino IDE
What's in the box
Soldered NULA Node RP2040 (main product)SKU 333409
Header pins (unsoldered)2x 15-pin 2.54 mm male header, one per GPIO row (VBAT/VCC/GND/3V3/RST/GPIO28 to GPIO14 and GND/GPIO0 to GPIO13)
USB-C cableUSB-C to USB-C, Soldered SKU 100359


